Roof Gutter Repair – How to Make Repairs Yourself

A simple roof gutter repair can save you a lot of money. Most roof gutters are made of metal and can be expensive to replace, so it’s important to take care of them quickly. However, a deteriorating gutter can lead to other problems and damage to your roof as well. To prevent this problem, you can try to repair yourself using these simple tips. Before beginning a roof gutter repair project, you should consider your options and ensure that you’re doing the job right.

roof repair

When you first notice that your gutters are damaged, you should contact a professional roofing company right away. It’s easy to spot a damaged gutter if it’s falling apart from its mounting brackets. If you’ve noticed water leaking from your roof, the issue is probably the gutter’s fault. If it’s the foundation, you’ll need to have it repaired. When you’re ready for a roof gutter repair, be sure to take your time. Don’t be afraid to ask for help. Many homeowners will need assistance with roof damage and repair projects.
When it comes to gutter repairs, it’s crucial to choose a qualified and experienced contractor. A properly maintained gutter will last for decades. It will carry water away from your home and foundation, which means you’ll be able to enjoy your roof for many more years. Fortunately, you’re not stuck with a malfunctioning gutter. You can handle these repairs by yourself without breaking the bank with a little knowledge. You can also hire a professional to fix a broken gutter and restore your home’s structural integrity.
Despite the need for roof gutter repair, it’s also important to remember that it extends the life of your roof. A properly installed gutter will keep water from damaging your property and the foundation of your home. Having it repaired as often as necessary will save you a lot of money in the long run. If you do the work right, you’ll have a gutter that will last for decades. The most important benefit of roof gutter repair is the increased protection that it provides for your home.
While you may not be able to afford a complete roof gutter repair, you can at least make some quick fixes. These repairs will not only improve the appearance of your home but will also increase the life of your roof. A properly functioning gutter will protect your home and your foundation for decades. The repair of a gutter will increase the value of your home. You should always be sure that the guttering is in good condition before repairing your roof.
Roof gutter repair is a good idea to protect your home from water damage. A properly functioning gutter will move water away from your home and protect your foundation. If you do the work right, your roof will be longer-lasting. It will prevent costly repairs later on and will make your home look great. If you have a gutter installation that needs to be repaired, call a roofing contractor for help. The sooner it is fixed, the better.
The repairs that you make will increase the lifespan of your roof. Having a properly functioning gutter will protect the overall structural integrity of your property and prevent expensive repairs in the future. A properly installed gutter will also protect your landscaping, prevent ice and water damage to your home. And if you don’t have a gutter, you’ll need to have it installed by a roofing contractor. Choosing a professional is an excellent choice, as they can ensure that you’re addressing any potential issues before they occur.
In addition to roof gutter repair, these repairs will improve the longevity of your roof. A properly functioning gutter is one of the best ways to prevent a damaged roof. Regularly inspecting your roof will ensure that it is safe to live on. If you notice anything out of the ordinary, a roof repair company will have the needed expertise to fix any problems. This will ensure your home is structurally sound and free from water and mold. With a professional roofing contractor, you’ll have a gutter system that is trouble-free and maintenance-free.
A well-maintained gutter will last for decades. The most important reason for proper maintenance is to keep water out of your home. A properly functioning gutter will protect your home and your foundation. By making roof gutter repairs regularly, you can save a lot of money and prevent expensive repairs in the future. You can also reduce your home insurance premium by paying a small fee every month. But make sure you have enough money to hire a professional to do the job.


Benefits of a Reusable Water Filter

Reusable Water Filter is a great option to filter water at home. It can save you money over the long run as it can last for several years. Many filters have refillable cartridges that you can wash and reuse. The best part is that these filters are made of heavy-duty materials and are designed to fit through a letterbox. This makes them an excellent investment. Reusable water filters are an easy way to reduce the cost of drinking water in your home.Reusable Water Filter

Another advantage of a reusable water filter is that it will also work as a water softener. It will remove rust, iron, manganese, and sands from water. It will also minimize stains on fixtures, kitchen wares, and pipes. Reusable water filters are designed to last a long time, and they will not need to be replaced regularly. Once installed, a reusable water filter will help save money on water bills for years to come.

Reusable water filters are a smart investment. The cost of a reusable water filter system is relatively low, and its features are motivating. The water canisters usually have a metal spigot, which prevents corrosion of household fixtures. Most of these filters are backed by a lifetime warranty. They also come with a warranty and a lifetime guarantee. A reusable water filter is a great choice for a home that has high-quality, city-supplied, or well-water.

The most important feature of a reusable water filter is its ability to save water. It includes a sanitizer and lubricant, which can improve the quality of your water from a city water system or well. It will also reduce the risk of rusting your kitchen wares and fittings. In fact, the filter will also prevent the occurrence of any of the problems above. This is a great way to protect your family’s health and save money on bottled water.

The 3-stage filtering system is the most durable and low-maintenance water filter. It is easy to clean and has an automatic flushing system. The 3-stage process also removes microorganisms. The lubricant can also protect against rusting and other common plumbing problems. These are just a few of the benefits of using a reusable water filter. They are an excellent choice for those who have well-water and need clean, healthy water.

Reusable water filter is a great option for homes that have a well. This system will help you conserve water while keeping your family safe and healthy. It is easy to clean and is also reusable. A reusable water filter can be a great investment for your home. Its high quality, durable, and affordable water filter will increase the value of your home. Its filters will also improve the quality of the tap water and improve your health.

The 3-stage filtering system is durable and low-maintenance. It will remove iron, sulfur, and manganese from water. In addition to removing these elements, the filter will also get rid of microorganisms that make the water unsafe for drinking. This type of reusable water filter can be used for home, irrigation, and swimming pools. Its maximum temperature is 100 degrees Fahrenheit. The three-stage process will ensure that your filtered water is free from harmful substances.

This 3-stage system is low maintenance and durable. It can remove rust, iron, manganese, and sulfur from water. The filtration process will also remove dissolved solids and other debris. The system will improve the quality of your city water or well. Some of the iron and manganese in the water can cause rusting in kitchen ware and fittings. If you have a well, you should consider a reusable water filter.

A reusable water filter is a great option for home use. Most of these units are made from carbon, which has a large internal surface that traps chemical impurities. Most domestic water filters have granular activated carbon, which removes undesirable tastes and smells. Other reusable water filters have carbon block elements, which have micron-level particle-removal capacity. A 10″ pleated cartridge is ideal for cleaning and reducing chlorine.


What’s That Smell in My Kitchen?

Do you have a mysterious, unpleasant odor in your kitchen? Something that doesn’t go away, no matter how many times you mop or take out the garbage? Check your kitchen sink.

Your kitchen sink might be the hardest working plumbing appliance in your home. If there’s a problem with it, chances are the food you run through the disposal or the grease you rinse off dirty plates isn’t getting properly removed from your house.

When food or grease gets caught in your kitchen sink’s pipes, it begins to rot. Rotting food or other debris can produce terrible smells and become a breeding ground for bacteria and pests. Even if you don’t have a disposal, the kind of stuff that drops down the kitchen sink’s drain can collect and start to smell surprisingly quickly. If your kitchen sink has a sour odor that you just can’t scrub away, here are a couple possible explanations and what you can do about it.

Grease on plate
Grease in the Drain

If you pour cooking grease or vegetable oil down your kitchen sink’s drain, it can congeal to the sides of the drain, disposal, or lower pipe. Then, the grease starts to decompose and trap other falling debris. Soon, an unruly rotting smell wafts back up out of the sink and into your kitchen.

Scoop about a cup of baking soda into your kitchen sink’s drain. Follow that up with about as much vinegar, then let it sit for about ten minutes. While the mixture is doing its thing, boil a pot of water. When ten minutes have passed, pour the boiling water into the sink. The baking soda and vinegar should foam up and eat away the grease in your drain, and then the boiling water will flush it all out.

Garbage disposal
Dirty Garbage Disposal

Sometimes, scraps of food or other gunk can catch on your garbage disposal’s blades. That food rots and starts to smell. Problems increase if:

You use your garbage disposal often.You run hot water with it.,You run no water.Your garbage disposal is older.

Grab about two cups of ice cubes and a cup of salt. Turn on the kitchen sink’s cold water and run the disposal for about 20 seconds. After that, dump the cups of ice and the salt into the disposal. Let the disposal keep running until all the ice cubes are gone. Cutting up the ice in cold water should have helped clear away the gunk caught on the blades.

For extra odor prevention, drop lemon, grapefruit, or orange rinds down the disposal while you’re running it with the ice. You can also add lemon juice and vinegar.

Kitchen p-trap
Problem with the Trap

If your kitchen sink smells more like sewer than rotten food, there might be a problem with its trap. A kitchen sink’s trap is the ‘P’ or ‘U’-shaped pipe directly beneath the sink basin. The trap’s job is to prevent sewer gas from drifting from the pipes back up into your house. It’s also handy for recovering lost wedding rings.

Usually, a sewer smell means that the water in the trap that blocks sewer gas has evaporated. This can happen if the sink hasn’t been used for awhile. If that’s the case, all you should have to do is run the sink and let the water fill back up in the trap. Watch the trap while running the water to make sure it isn’t leaking.

If that doesn’t fix the problem, take the trap out, empty it, scrub it down with an old toothbrush and a cleaning agent, and replace it. Clogs can build up in kitchen and bathroom traps. They may need to be cleaned periodically but if the problem persists, give us a call.

Roof vents
Clogged Vent

If there’s a sewer smell coming from your sink and you don’t think the trap is the problem, the next most likely culprit is the vent. The plumbing drain vent is basically a long, narrow, vertical shaft connecting your main sewer line to the outside air. This shaft vent stabilizes the pressure inside the pipe connecting to your sewer. Without it, water may siphon out of your sink’s trap, letting sewer gas in.

Plumbing vents are located on the roof of the house. When they’re not working, it’s usually because something is obstructing it, such as a bird’s nest or a piece of debris. There could also be a leak in the vent’s shaft, which would interfere with its pressure mitigation or could even let sewer gas into your house. In either case, you may want to consider calling a professional. Clearing a vent obstruction may not sound like a big job, but roof jobs are always trickier than they seem.

 Keeping L.A. Smelling Good

If your kitchen sink smells, hopefully one of these quick fixes solves the problem. If the stench is coming from a simple clog, try plunging with a cup plunger.

If you’ve tried everything and you’ve still got a bad smell, give us a call. There’s more than one reason Mike Diamond is your “Smell good plumber.” With our pipe cleaning technology and years of experience, we guarantee we’ll find and solve your problem and get your kitchen smelling fresh again.

The post What’s That Smell in My Kitchen? appeared first on Mike Diamond Services.

Did you miss our previous article…


The Importance of Plumbing Maintenance

Regular plumbing maintenance is very important to keep your home running smoothly. Performing these preventive measures will save you energy and water costs. Not only will they help you to save money on your water bill, but they will also help you keep your house in order. This can prevent plumbing problems and also save you from spending a lot of money on repairs. However, you will have to make sure to do these simple things regularly. The best way to perform plumbing maintenance is to hire a professional. Click Here to learn more about plumbing services.


Clogs are a very common problem when it comes to plumbing. Whether you have a clog in your sink, shower, or toilet, preventing it from getting to the sewer will make your home run smoothly. You should also make sure to maintain the cleanliness of your pipes regularly. This will help you avoid costly emergencies down the road. By performing plumbing maintenance, you can extend the life of your system and ensure that you are getting the best water quality possible.

A regular plumber will check your drains, look for clogs, and fix the problems preventing your plumbing from working properly. They will also look for leaks and corrosion. They will also inspect your pipes and fixtures to ensure that they are in good condition. A plumbing professional will be able to diagnose any problems and keep them from developing into bigger ones. A good plumbing maintenance plan will keep your pipes in pristine condition and save your business from expensive headaches.

It is essential to have a well-maintained plumbing system to conserve water and reduce energy costs. Not only is plumbing maintenance important, but it is also essential to have a proper maintenance plan. The following tips will ensure that your plumbing system is always in top shape: You should vacuum your carpets regularly to remove excess water and clean up any stains. In addition, you should inspect your faucets, pipes, and faucets every week.

Annual plumbing maintenance will prevent the need for costly repair bills. It would be best to replace your old faucets and other fixtures that are prone to leaking. You should also schedule your plumbing inspections according to your needs. If you want to have a professional plumber perform these checks regularly, make sure to contact them. They can save you time and money. They can provide the needed assistance you need. They can perform any necessary repairs.

In addition to plumbing maintenance, you should also check sewer lines for problems and repair them. Sewage backups are a major issue that may require major plumbing repairs. Your sewer line can also be a sign of a problem. Keeping your plumbing system well-maintained is crucial to your home’s value and health. By doing regular maintenance, you can prevent the problem and save money. In addition, your home will be more appealing, and your wallet will thank you.

You can save a lot of money if you do regular plumbing maintenance. In addition to plumbing repairs, you can also have your plumber inspect your system for leaks and clogs. It is important to have your plumber perform maintenance on your sewer line. This will ensure that you aren’t spending too much money on repairing a pipe. If you have a leaky sewer line, your water bills will go up as well.

You can save a lot of money and time by doing routine plumbing maintenance. This type of preventative maintenance can help you detect a problem before it can become a huge problem. By performing a thorough inspection, you will be able to see whether your pipes are clogged or not. This will help you save time and money. It will also make your pipes more durable. Further, plumbing maintenance is a great way to prevent the development of mold and fungus in your home.

Besides performing regular maintenance, you should make sure your plumbing is working properly. By doing so, you’ll not need to deal with the risks associated with waterborne diseases. When you do regular plumbing maintenance, you’ll get better water pressure and avoid dangerous situations. A plumbing problem can even kill you. But, it’s very easy to avoid problems with regular maintenance. You have to be proactive. When you do regular maintenance, you’ll be able to save more time and money.


How to Deal With an Emergency Plumbing Problem

If you have an emergency, you should call an emergency plumber to fix the problem. Even if you have a plumbing company in your home, you may not always know when you might need them. The best thing to do is write down the number of the emergency plumbers and keep them on your phone. However, you should avoid making calls until you are sure that there is a real emergency. This way, you’ll be able to contact the most suitable plumbing company at once.


The first step in addressing an emergency plumbing problem is to prepare. Have a few tools on hand. A five-gallon bucket is the most helpful tool in an emergency plumbing kit. It can collect water if there is a leak, and it can also catch any excess water that is present. It would help if you also carried a toilet plunger or a drain snake for emergency use. This way, you can easily open the drain.

The next step in an emergency plumbing service is to call a plumber. Your plumber will come to your home as soon as possible, but you should never forget that the price will be different from regular services. The plumbers will need to order necessary parts, which may take a couple of hours. You can also get an estimate of how much the service will cost. You can even choose to work with a company that will respond within 24 hours.

A clogged drain is also an emergency plumbing issue. It can prevent the water from flowing through your home and require a professional plumber to fix the problem. Most clogged drains can be fixed by yourself, but you can call a plumbing company if you’re not sure. It’s best to hire an emergency plumber in case the problem is a bit complex. It’s also best to call a plumber as quickly as possible since it could cost you a lot of money in the long run.

An emergency plumbing service will be able to fix the problem fast. It’s essential to call a plumber for all emergency plumbing needs because a broken water pipe can cause a lot of damage to your home. A professional plumber will help you with any plumbing repair and can handle emergencies safely and efficiently. The problem can be difficult to repair on your own, but you must contact a professional right away to avoid any unnecessary damage to your home.

A clogged drain is one of the most common plumbing emergencies. You’ll probably need a professional emergency plumbing service for this type of problem, but it can be easily repaired by removing hair and soap scum from the drain most of the time. The best option is to call a professional plumber for the job, as this will save you a lot of time and money in the long run. And if you’re looking for a plumber, don’t hesitate to call a 24-hour company.

A plumber who works in emergency plumbing situations can be the difference between life and death. A plumber who works around the clock will be able to repair the damage and restore water pressure. He will also be able to give you tips on preventing further damages and making your property look better than ever. So, call an emergency plumber as soon as you can! The emergency plumbers will come prepared with the proper tools and equipment needed for the job.

Burst pipes are another typical plumbing emergency. A burst pipe can cause a lot of damage, so it is vital to call a plumber as soon as possible. While you might be able to fix the problem on your own, the damage can be costly and may even threaten the home’s safety. This is why it’s best to call a plumber who specializes in plumbing services in your area. You won’t regret it!

In case of a major plumbing emergency, a professional plumber should be called immediately. These plumbers are experienced in dealing with emergencies and can deal with them professionally and with a sense of urgency. In the event of a plumbing emergency, call an emergency plumber to fix the problem. These professionals will be able to solve the problem quickly and avoid further damage. They can also prevent further damage to the property. There are many reasons to call an emergency plumbing service.


What You Should Know About Pinhole Leak in Copper Pipe

Pinhole leak in copper pipe

Modern copper pipes should last for 20 years or more. Unfortunately, that doesn’t always happen, thanks to a particularly pernicious plumbing problem known as pinhole leaking. Pinhole leaks only occur in copper pipe. Under the right (worst) conditions, copper pipe may develop pinhole leaks within only two years of installation.

Pinhole leak in copper pipe is a common problem all over the US. Your copper pipes spring a pinhole leak when variations in your water’s ph (acid) value wear away at the inside pipe’s natural defenses against corrosion. If you use copper pipes (and, frankly, you should), you should know what a pinhole leak is and how to prevent it. Here’s where to start:

What is a pinhole leak?

The State of Maryland Task Force to Study Pinhole Leaks in Copper Plumbing defines pinhole leaks as, “the perforation of copper tube, pipe or fittings used for domestic water distribution as the result of pitting corrosion initiated on the interior/waterside surface with the subsequent leakage of water.”

Pinhole leaks are generally very small (often less than ⅛” wide) and shaped like pinholes, hence the name. A pinhole leak itself represents the final “burst through” of a worsening corrosion problem on the interior of a copper pipe. In other words, pinhole leaks are not only a problem in and of themselves; they also represent the manifestation of long-term corrosion damage.

How does a pinhole leak in copper pipe occur?

Copper pipe joints made of a different kind of metal

As the Maryland Task Force notes above, pinhole leaks are caused by “pitting corrosion.” The Association for Materials Protection and Performance defines pitting corrosion as “is a localized form of corrosion by which cavities or ‘holes’ are produced in the material.“ Pitting corrosion only affects a very small portion of a copper pipe, eventually wearing away material more and more until it falls in on itself as a “pit” or “hole” – which, in turn, becomes a pinhole leak.

According to the Task Force’s research, pitting corrosion occurs for one of three reasons:

Chemical or mechanical damage to the protective oxide film that coats copper pipe,Localized damage to or poor application of protective coating, orThe presence of non-uniformities in the metal structure of the component, e.g. nonmetallic inclusions.

Any of these three inciting conditions could cause your pinhole leak in copper pipe in the following ways:

Chemical damage

This is the most likely cause of your pinhole leak in copper pipe. Your home water’s ph value has little to no bearing on your water’s quality or safety, but it can affect your pipes. In its own investigation of pinhole leak in copper pipe, the city of Folsom found four different ways water’s ph value could interact with its sulfate content, temperature, bacteria, and/or piping metal to produce the conditions for copper pitting.

Should any of these conditions occur in your pipes, then the chemical reaction will eat away at the protective oxide coating insulating the inner pipes metal from the water running through them. When this coating wears away completely in small places, then that small portion of the pipe is highly vulnerable to corrosion – hence, a pinhole leak forms.

Mechanical damage

Physical contaminants such as sediment or heavy metals present in the water supply may wear away at the inside of your pipes as they pass through. This could occur if your water is particularly hard or only locally treated (if it’s well water, for instance). Abnormally high water pressure may also scrape away the oxide coating of copper piping over time.

Localized damage or poor application of protective coating

It is unlikely but not impossible that your copper pipes are either of a poor quality or were improperly installed. This is more likely if your pipes were retrofitted and/or installed unprofessionally. Damaged copper pipes may not possess the same resistance to corrosion as they should, which can lead to pinhole leaking and other problems.

Non-uniformities in the metal structure

This is particularly likely if your pipes were only partially retrofitted into your home, ie: if your home uses both copper pipes and another type of metal for either piping or connective joints. When two different metals interact, especially in a solvent like water, the resulting tension can wear away at both. In the case of copper pipes, this tension will wear away at the oxide coating inside your pipes, eventually leading to pinhole leaks.

What are the signs there is a pinhole leak in my copper pipe?

Signs of pinhole leak in copper pipe - oxidation of copper pipe

If you suspect you may have a pinhole leak in copper pipe, look for any of the following signs:

Higher water bill: All leaks will raise your water bill, no matter how smallLower water pressure: Pressure leaks out of pinhole leaks just like water does, which will result in lower water pressure throughout your homeDripping sounds: Try to follow the sound to the leak itself, if possibleWater damage: Especially under or around your pipesMold or mildew growth: Especially near your pipesCondensation on your pipes: The outside of your pipes should never feel moist or wetPipe discoloration: If your copper pipes ever look too brown, green, or blue, then it means they’re partially oxidizing

However, keep in mind that pinhole leaks are notoriously difficult to find. After all, they’re very small and they can occur anywhere along a copper pipe. The best way to look for leaks is to turn off your water and check your water meter. If you’re sure you’ve turned off the supply but the water meter is still moving, then you have a leak. If you have copper piping and a leak, then it stands to reason you may have a pinhole leak.

How not to fix pinhole leak in copper pipe

Before we teach you how to fix your pinhole leaks, it’s important you learn what not to do. This is because there’s a lot of bad advice about repairing pinhole leaks out there. Not only are most of the DIY fixes you can read about ineffective, but in many cases they’ll create new problems.

For instance, you shouldn’t use either pipe repair clamps or replacement pipes affixed with couplings. Pipe repair clamps are fundamentally a temporary solution. They may even introduce chemical and metal alterations to your water, which can further wear away at the pipe. Likewise, couplings and replacement pipe negatively interact with the copper in your pipes. This can create the tension that wears away at oxide coating referred to above. By applying either of these methods to your pinhole leak, you might create a big problem by trying to solve a little one!

How to fix pinhole leak in copper pipe

Fixing a pinhole leak in copper pipe

The only truly effective way to fix pinhole leaks in copper pipes is via the “sweating” replacement method. While you can find everything you need to attempt sweat coupling yourself at hardware stores, we generally don’t recommend homeowners try it themselves because it involves soldering and requires significant experience. If you insist on attempting sweat soldering yourself, however, or you’re just curious how it works, this is an overview:

NOTE: sweating pipe replacements are only recommended if you have to repair ½” of copper pipe or less. If the replacement job proves to require more significant replacement, you should call a professional.

Tools required:

Tube cutterCotton ragsMeasuring tapeSweat coupling replacement pipe¾” diameter wire fitting brushSolder wirePropane torch


Locate and mark the leak on your pipeTurn off the water main! (this is important!)Drain the pipe of waterCut up to ½” of damaged section and surrounding pipe out using the tube cutterDry the new openings created by cutting away the damaged section. Stuff each side with the cotton rags to keep them from getting wet again. Only remove these cotton rags right before you solderMeasure the gap created by removing the damaged sectionMeasure and cut a replacement section of sweat coupling replacement pipe that’s 1” longer than the gap’s measurementSmooth the rough edges of the replacement pipe with the cutterSmooth the rough inner edges of the pipe with the wire fitting brushClean and smooth the cut sections of attached pipe, as you did with the replacement sectionSlide the sweat coupling replacement pipe over each end of the remaining pipes. Make sure about ½” of the replacement pipe fits over the old sectionSolder the new joint by holding the torch to one side and the tip of the solder wire to the other until enough of the wire melts into the opening to completely fill itTurn on the water and test the repair

How to prevent pinhole leaks in copper pipes

With a little investment and diligence, you can prevent the problems that create a pinhole leak in copper pipe listed above. Here’s how to make sure each one doesn’t give you grief:

Chemical damage

The chemical interactions that wear away at copper pipes typically occur because of high ph value in your water. Investing in a water softener can help prevent the kind of ph values that will harm your copper pipes. If you already have a water softener, make sure it’s functioning correctly and adjust it as needed.

Mechanical damage

A water softener will also remove many of the contaminants that could scrape up your copper pipes over time.

Water softeners won’t affect your water pressure, however. If your water pressure seems abnormally high, you may have to take other measures. Check the pressure meter on your water main. If it seems much too high, then you should ask your municipal water supplier why. If they can’t determine a cause, invest in a water pressure limiter to keep high pressure from hurting your pipes.

Localized damage or poor application of protective coating

If your pipes were improperly installed or look damaged, then we highly recommend replacing them as soon as possible. A professional plumbing inspection can tell you if you need to replace your pipes or if less major fixes are possible.

Non-uniformities in the metal structure

It may be possible to replace outdated joints, fittings, or old segments of pipe used throughout your home. We recommend a professional plumbing inspection to determine where the problematic pipe material is and what we should do about it.


Pinhole leak in copper pipe is a frustratingly common and significant problem for homeowners throughout the US. Fortunately, it’s also an easily fixed problem. If you think you may have a pinhole leak in your copper pipes, all you have to do is call Mike Diamond.

The Smell Good experts can find your pinhole leaks, fix them, and help you make sure they don’t happen again. Your copper pipes are far too effective (not to mention expensive!) for you to tolerate leaks, no matter how small. So stop tolerating and call now!

The post What You Should Know About Pinhole Leak in Copper Pipe appeared first on Mike Diamond Services.


Gas Furnace Maintenance Tips to Keep the Heat Coming


Even if winters don’t exactly get Arctic-cold in Southern California, it doesn’t mean that you want your gas furnace to go out. The best way to avoid potential trouble on those chilly evenings is with regular furnace maintenance. Keeping your furnace clean and in good working order means it’s always ready for that unexpected cold front.

To keep your gas furnace working when you need it, we recommend an annual furnace checkup. During the rest of the winter, follow these seven furnace maintenance tips to keep the heat coming:

Work under safe conditions

Before you do anything, make sure you’re working safely. Gas can be dangerous if you don’t handle it correctly. Before you begin any serious furnace maintenance, make sure you turn everything off. If you’re not 100% sure what you need to turn off to get the work done, trip the main circuit breaker to verify your safety during the maintenance process.

Finally, if you smell gas, don’t try to shut anything off or turn it on–instead, leave the premises immediately. Have a professional flush the gas from the house and fix the leak before you do any more work.

A Los Angeles homeowner easily replaces their furnace filter
How to Check Your Furnace Filter

A gas furnace’s filter prevents dirt from entering the unit and building up. Build up can lead to malfunctions or even fires. A filter also keeps the warm air blown into your home clean. Check your filter at least once every other month. This holds true for summer as well as you run your air conditioner.

Your filter is simply a cardboard rectangle with a mesh covering. It easily slides in and out of its designated slot, usually at the bottom of your furnace. You can find most replacement filters at your local hardware or home improvement store.

Test your thermostat

If the temperature setting on your thermostat doesn’t match the actual temperature, you may have one of two furnace-related problems:

The thermostat itself has stopped working.There’s a disconnect between the wall unit and the furnace.

Either way, if this happens frequently, you’ll want to repair or upgrade your thermostat. A new, programmable energy efficient thermostat isn’t expensive and usually pays for itself in energy cost savings.

Clean the blower

While checking the filtration system, also check the blower. The blower is further inside, and you should be able to see it when you change the air filter. It’s a circular intake with a wheel-like fan.

Wipe the blower down with a damp cloth each time you change the filter. Cleaning the blower prevents dust or dirt that may have escaped through the filter from getting further inside the furnace.

Cleaning exterior vents is part of annual furnace maintenance.
Regularly check and clean your vents

All gas furnaces have a venting system that prevents unsafe heat build-up. Just like with anything else that never moves, dust builds up both on and within furnace vent systems. Clean them with a scrubbing brush, vacuum cleaner, and damp cloth to ensure their continued effectiveness.

Inspect your flue pipe for cracks or holes where dangerous carbon monoxide could leak.

Inspect the fan

This maintenance is best left to a professional. It isn’t as easy to get to the fan within the furnace as it is to get to everything else. Getting pre-winter furnace maintenance is recommended to keep up with part changes and cleaning needs. Don’t let small problems become big.

Clean Your Air Ducts

Vacuum them out or have a professional do it. Dust, pet dander and debris that builds up inside your ducts eventually gets blown all over your home. Clean ducts work better and mean cleaner air.

 Annual Furnace Maintenance in Los Angeles

Keeping your furnace clean is the easiest way to extend its life and keep it from breaking down. Hopefully this furnace maintenance checklist helps you get started.

Not everyone is up to this level of DIY maintenance. If you want a certified technician to perform your gas furnace cleaning, the trained professionals at Mike Diamond are ready and waiting to help you out.

The post Gas Furnace Maintenance Tips to Keep the Heat Coming appeared first on Mike Diamond Services.

Did you miss our previous article…


Let Us Fix Your Drainage Problems

When you need a drain repaired, let professionals be the ones you call for assistance. When you’ve had repeated difficulties with a particular drain, especially in terms of it constantly clogging, even with professional help, it may be time to get the drain repaired as soon as possible. A faulty drain will often lead to a more costly problem, so make sure to let a reliable Drain Repair San Jose service fix your gutter for you. A good plumber or drain cleaning service will give you the best service available for drain repair.

drain cleaning

There are several different reasons why you might need a drain repaired, and there are also a variety of different kinds of solutions for drains. From simple blockages to more tough clogs, a qualified professional can address many drain repair needs. The most common drain issues arise from simple blockages, but drains are other less mundane reasons to stop operating as effectively as they should. Even clogged drains can sometimes become blocked themselves, so this is also another reason why you might need a repair. Professional drain cleaning services know all about the causes of clogs, which allows them to offer various solutions.

Clogs are a problem that can plague any plumbing system, but they tend to affect drains in more unusual ways. While a few clogs result from food and beverage residue blocking the pipes, many clogs result from a buildup of materials like grease or hair. This means that any drain repair needs to involve more than just examining the main sewer line. Instead, a professional will be able to investigate your drains individually based on the warning signs presented to them.

One of the most common drain clogs is slow to drain repair. As soon as you notice that water isn’t draining quickly enough from your sink or tub, get out a flashlight and look for the problem. Several things could cause a slow drain issue, so it’s essential to make a list of possible culprits before calling a plumber. Common causes include:

  • Poor flooring or tile installation.
  • Poor surface drainage.
  • Standing water in a pipe.

Some of these issues can be fixed with simple household adjustments, while others may require the expertise of a licensed plumber.

Another common problem that plumbers can address is tree roots. Roots in drains can cause several problems, from making it impossible to flush the toilet or drain field to making it difficult to clean. For drain maintenance in the kitchen, slow draining sinks and pots can be solved by pruning the roots in the line. For larger clogged drains, a rooter service might be needed to obliterate the tree roots.

Tree roots can also break off plumbing pipes, create a clog, or cause sewer lines to back up and destroy sewer lines. Tree roots can also dislodge pipes, causing them to become backed up and overflowing. This can also lead to a blocked sewer line, which is extremely serious. However, a professional can easily take care of this problem in a timely fashion. In most cases, all that will be needed to address the clog is an extension ladder, a pry bar, and some drain-cleaning chemicals.

There are many other drain-related problems that plumbing professionals deal with daily. One of the most common issues is seepage through plumbing pipes, especially in the bathroom. Leaking water pipes can cause damage to countertops, sink tops, and even floors if they are not attended to right away. In addition, old or rusty piping can be very dangerous, as they are more likely to rust over time. Drainage service professionals can address many of these issues on-site or send their workers to a local plumbing shop to repair the problem.

For more minor issues, such as broken drain screens, a plumber may be able to fix the problem on his own. More minor plumbing repairs, such as broken pipe screens, often don’t require the services of a professional repairman unless the broken drain poses a threat to someone’s health or the safety of someone else’s property. To ensure that this type of problem is fixed correctly, contact a local plumbing contractor in your area to let us know what you need to do and see if we can help you. If we cannot repair your issue on our own, we can refer you to someone who can. Drain repair needs to be carefully handled, as letting this type of issue go without repair can lead to severe complications and even potentially dangerous situations.


The Importance Of Having A Reputable Plumbing Service Provider

The residential plumbing system is a water system that provides a connection between the house water supply and the various fixtures, pipes, and fittings. The most popular types of residential Plumbing are used in domestic households like kitchens, bathrooms, and living rooms. These are usually built using cast iron or steel pipes. In some cases, the plumbing is made from copper, bronze, or other metals. Professional plumbing companies or plumbers also install the plumbing.plumber

In some parts of the world, the residential plumbing system is not installed by the contractors. They perform the service instead. People who hire the services of a plumbing contractor to install the plumbing system in their houses do so for several reasons. Many times, the homeowners want to have a unique design for their houses and this requires the contractor to carefully research on the various options available and then select the one that suits their taste and also meets the safety requirements.

The first thing that you need to learn about the residential plumbing system is that it is made up of a collection of individual pipes and components. The pipes are placed in special fixtures which form the pipes of the residential plumbing system. Each fixture has a specific task to perform inside the house and thus, the plumbing needs to be properly designed so as to carry out the purpose. If you are looking to have a completely new system installed in your home, then you will have to bear the cost of construction as well as the installation cost. However, with an experienced professional plumbing company offering you an affordable solution, you can save a lot of money without jeopardizing the look of your home.

You can find a number of different plumbing systems available which include faucets, bathtubs, toilets, kitchen sinks and showers. The plumbing system is basically responsible for carrying water from the kitchen sink or the bathroom to all the necessary fixtures within the house. If the plumbing is designed improperly then it will cause complications like leaks and clogs in the long run. In case of a leak or clog in the plumbing system, you will have to carry out extensive plumbing repairs or replacement.

If you hire an experienced plumbing company, you can expect them to carry out an assessment of the house. The problems that they will identify during the assessment process will help them to carry out the residential plumbing system installation in a hassle free manner. This way, you can come to know about the exact cost of the installation process without having to face any complications. When you hire the services of a professional plumbing company, they will carry out the entire residential plumbing system installation in a hassle free manner. The plumbing company will also take care of all the details like billing, re-potting of the drainage areas, disconnection of old pipes and installation of new ones.

The best part about hiring a plumbing company is that they provide you with skilled plumbers who have years of experience in installing residential plumbing systems. If you are planning to replace the old plumbing with a new one, then it would be wise to hire an experienced plumber who has the necessary skill set and knowledge required for the plumbing job. You can also enquire from a few of the experienced plumbers to find out if they are offering any guarantee. This will ensure that you will not be paying for a plumbing service which is not up to the mark.

Before choosing a plumbing service provider, make sure that the one you have selected is equipped with skilled and trained plumbers who have the necessary skill set required for the plumbing system installation. You should enquire from the service provider whether they have any past experience in plumbing installation and whether they have the requisite skill sets required to install the plumbing system in your home. It is very important to choose a residential plumbing system company that has an established track record and a good customer feedback rating. It is important to enquire from the service provider as to what types of plumbing equipments they use for residential plumbing system installation.

When it comes to residential plumbing system installation, it is very important to hire a professional plumbing company that has the requisite skill sets and experience required. The plumbing professional should be able to install the new piping in a timely manner without compromising on the quality of the product. Residential plumbing companies should offer an extensive warranty period along with excellent customer service. They should also provide you with the necessary tips on maintaining your plumbing system in excellent working condition.


Why You Should Hire a Professional Plumber for Some Repairs

If you are considering re-piping your house, it is wise to hire the services of a reputed professional plumbing company. Only an experienced plumber knows precisely where to place the pipes and what tools to use to carry out the job well. The plumbing industry has experienced many advancements, and knowledge of the latest plumbing technologies helps them perform the job well. In addition to that, plumbing companies are adept at designing fixtures and providing customers with long-lasting solutions.plumbers

Plumbing companies provide re-piping services at competitive prices. Moreover, they have a team of professionals who can do the job in a hassle-free manner. The plumbing company first inspects your plumbing system and carries out specific tests to detect any damages. If any part of the plumbing system needs to be repaired or replaced, the plumbers send their technicians who do the work in a highly professional manner. They also do proper disposal of used pipes and accessories so that there is no environmental issue.

When a homeowner wants to replace old plumbing or do extensive remodeling in their house, it may be difficult to think of a way to properly insert new pipes without making any structural changes. For this reason, many people seek the help of a professional in re-piping their house. One of the most common questions asked by customers is whether they need to completely replace all of the old pipes or just some of it. There is no hard-and-fast rule about doing both. It depends on the situation.

For example, a home needs re-piping services when there is a drastic change in the water pressure or if the water supply runs through the rusty pipes. It is also necessary to replace all the old fittings in order to make sure that the water pressure is not shut down while repairs are being made. Sometimes, the pressure may be shut down for a few hours but eventually it will need to be repaired. This means that the homeowner will have to get new plumbing installation done, which could take quite some time.

Another reason that re-piping services may be needed is when a plumber is installing a new plumbing system in a bathroom or kitchen sink. In order to make the new system work properly, it must be able to flow with ease from sink to sink. The old plumbing pipe that was originally connected to the kitchen sink might need to be torn out and replaced with a new pipe that is smaller or it might even need to be replaced with a new pipe. Whatever the case, it is a good idea to get this type of service done as soon as possible to prevent damage to the plumbing system.

Another reason that homeowners should consider calling a professional when it comes to re-piping services is when they have a toilet that is simply not producing enough water. Sometimes a homeowner does not realize that the toilet is not producing enough water to go with the amount of waste being produced. This can lead to a clogged toilet that is giving off very little water. In order to remedy this problem, a professional will run an analysis on the water usage and piping to see what is going on. Then they can suggest options that will help to get rid of the problem.

Finally, re-piping services can be needed when a homeowner is simply trying to fix a leaking plumbing system. Many times, it can be difficult to find the exact location of where the leak is originating from. If a plumber is brought in to inspect and fix the problem, then he can simply locate the exact location that is causing the leak and install the correct pipe. In many cases, all that is needed to fix a leaking toilet is replacing a single pipe.

While it is important for homeowners to have their plumbers perform all of these tasks whenever they feel the need, it can be equally important for them to have these inspections done as well. These types of inspections are not simply used for the purposes of checking the condition of a leaking plumbing system or repairing a broken pipe. A qualified plumbing professional can identify problems with older homes before they present issues with newer residences. He can also offer tips and advice for homeowners who are looking for ways to improve the efficiency of their plumbing system. When a homeowner considers re-piping services, they should make sure they are hiring someone who is qualified and skilled in the field of plumbing so that the job is completed properly and without problems.