Different Types of Roof Damage Repair

by Posted in Plumbing Services

Roof damage can be costly, especially when it involves your roof. When you have an intact roof, repairing the damage is relatively easy, but it may prove to be a lot more complicated for the rest of the roof structure. However, you do have many options to prevent roof damage from occurring in the first place. You could hire a professional contractor, you could choose to repair the roof on your own, or perhaps you could take matters into your hand and repair the roof yourself. Whatever the case, it is always good to know what your options are to know what to do when roof damage repair becomes necessary.roof damage repair

If roof damage has already occurred, the first thing that you should do is contact Roofing contractor and schedule an appointment. Before the repair goes underway, the contractor will inspect the damage and give you a price estimate. Although some roofing contractors might try to charge you for this inspection, it is highly recommended that you pay for it yourself so that you get a full picture of the extent of the damages. In order to determine whether or not the roofing materials used on the house belong to the proper type, the roofing contractor will also need to examine the roof materials yourself. As a result, this will not only save you money but also time since you will not have to waste your time going to the store for new roofing materials.

Once the roof damage repair is already scheduled, the roofing contractor will then show you the shingles that he will be using to repair the roof. These shingles will usually come in two types, one made of asphalt and the other one consists of slate. Since both of these shingles come in different materials, it is important that you know which material you should buy. This is because some contractors might suggest you buy the cheaper asphalt shingles which will actually cost you more in the long run. You don’t want to spend money on roofing materials which are not durable enough to last for several years.

When you finally get your estimate, you will be able to decide on which roofing contractor to hire for your roof damage repairs. Keep in mind that hiring the cheapest roofing contractor may not always give you the best results. It is also essential that you consider the experience of the contractor. An experienced roofing contractor can easily detect possible signs of roof leak damage which are often missed by novice roofing contractors.

If the roofing contractors determines that there is indeed a roof leak damage, the next step that they will take is to investigate where the leaks are coming from. If you are living in an area with a particularly dry climate, then you are highly likely to have hail damage repairs. This is because dry winds tend to blow the hail towards the weakest points in a building. These weak points are the weak spots in a building where the hail can easily enter the roof and cause leaks.

Aside from wind and hail, high winds are also another factor which causes roof damage. In most cases, high winds cause severe damage to houses which are located in coastal areas. In addition, many people who live in hurricane-prone areas also face the risk of roof damage due to strong winds during tropical storms. Aside from these hurricane-related roof damage repairs, strong storms with lightning also pose as a serious threat to a building’s roof.

Roof leaks are commonly caused by poorly installed shingles. If you are interested in making repairs to your roof, you have to find the exact area where the leak is occurring. This will be very difficult to do unless you have a professional inspector inspect the roofing materials which were used in the construction of your house. Most of the time, homeowners discover leaks in their roofs after conducting roofing maintenance or after taking it for a test ride. However, if you want to avoid spending money and time on roof leak repairs, you should consult your roofing contractor about it.

Apart from water leaks and windstorms, roofing materials may also undergo wear and tear due to extreme temperatures. Hot weather causes damages not only to the roof but also to the entire structure of your home. It is important for you to identify the signs early so that you will know what steps you need to take to prevent further damage and repairs. For instance, if your roof begins to leak after a particularly hot day, it is important for you to find a solution as soon as possible. In this case, it would be advisable to contact your roofing contractor as soon as possible.

post

Clogged, Blocked, or Slow Moving Drains? Here’s What to Do

by Posted in Plumbing Tips


Getting a great plumbing system requires you to be as proactive as possible. While it’s common for plumbing problems to sneak up on you and cause interupptions, we don’t want this to happen to you repeatedly. This is why we’d like you to take a step back today and understand what’s going on with your plumbing system when this happens.

We specialize in plumbing in Orlando, FL. If you’d like to improve your plumbing, then we’re the ones who can make this happen for you. Today, we’re going to discuss what might be going on in your home if you have clogs, cracks, or slow-moving drains and we’ll explain how to fix these issues.

What’s Going On?

Let’s go through the problems that you might be experiencing and their backstory.

Clogs

Food debris, soap scum, fats, oils, grease, and more all add up. These are the things that create the clogs that cause your sink to bubble.

Blocks

Are you wondering how blocks are different than clogs? Blocks are what we classify as outside problems that have worked their way into your system. These are the tree branches and other things that can interfere with your home’s plumbing system.

Slow Moving Drains

Slow-moving drains are the warning signs that come before clogs. Don’t ignore this issue. It’s your sign to get a professional by your side. 

How Did It Happen?

Okay, now let’s get into how this might have happened. This is the backtracking that we alluded to in the introduction. Figuring out how this happened is the best way to prevent it from ever happening again. Here are a few reasons why you might have issues:

FOG: FOG is an acronym that stands for fat, oil, or grease. If you’re letting these substances slide down the drain, it might be fine at first, but it’s eventually going to settle and become an issue for your home. These substances are magnets for clogs and it’s going to create a snowball effect. No Drain Strainer: The best (and simplest) thing you can do for your plumbing is run out to your local hardware store and get yourself a drain strainer. We’re all fallible. If you make a mistake from time to time, your drain strainer will have your back.Lack of Proper Care or Maintenance: You should be maintaining your home’s plumbing system just like any other home system. Make sure that you have a professional out to your home when you need maintenance or any other plumbing service. 

What Should You Do?

Honestly speaking, the better way to phrase this might be, “what not to do” because the one thing you should do is schedule an appointment with a professional. Your plumbing system is complex and requires professional care. Don’t let someone who doesn’t have years of experience, training, and licensure touch your plumbing system. 

If you’re tempted by the in-store and over-the-counter drain cleaners, this is your warning sign not to go through with what you’re considering. You need professional care. Amateur plumbing efforts are always bad news. We want to help you move around this. 

Contact Modern Plumbing Industries, Inc. today to schedule an appointment with our professionals. 

Did you miss our previous article…
https://tkoplumbingco.com/?p=177

post

How to Fix a Loose Toilet Handle

by Posted in Plumbing Maintenance

>
Wiggling toilet handle

A loose or wiggly toilet handle can be annoying. A toilet handle not flushing at all is even worse.

Luckily, a loose toilet handle is a minor toilet problem and one that’s usually easy to fix. Here’s how you can fix a broken toilet handle, either by tightening or replacing it.

How to Tighten a Toilet Handle

Close the toilet seat cover.Keep parts or tools from falling in.

Remove the toilet tank cover.Use two hands as it may be heavy and set it on a flat surface where it won’t fall or crack.

Shut off the water supply to your toilet.The shut-off valve should be located near the base towards the back of your toilet.

Press the toilet tank lever to empty the water from the tank.This allows you easier access to the inside of the handle.

Find the toilet handle nut.It will be on the inside of the porcelain wall adjacent to the handle. This is probably the source of your loose toilet handle.

Tighten the toilet handle nut.Use an adjustable wrench or pliers clockwise to ensure the nut fits snuggly. Do not over-tighten – it could cause your porcelain tank to crack.

Depress the toilet handle to test.If it feels and sounds better, well done. If not, read on to learn how to replace a toilet handle.

Turn water supply back on.Turn the shut-off valve counter clockwise to open. Your tank will refill.

How to Replace a Toilet Handle

Determine what hardware you’ll need for your toilet lever replacement. Most hardware stores sell universal toilet handles, but you may need a specific variety. Look up your existing brand name, model, and make to see what type of flush handle replacement will work.Close the seat, remove the tank lid, turn off the water and empty the tank. (See 1-4 above.)Look inside the tank and unclasp the chain clip that’s attached to the lever. This is a small chain hooked onto the inside portion of your toilet handle.Remove the mounting nut. This is the same nut you would have tightened in the first walkthrough up above. Use a wrench or pliers to unscrew the nut (counter-clockwise) and take it off. Pull the old handle out. Once the nut and chain holding it in place are removed, you can pull it out by hand. You might have to angle it a bit to get it out, but that’s normal.Unscrew the mounting nut on the new handle nut, but don’t lose it. The nut may be metal or plastic.Insert the new lever into the tank to match the position of old one. You’ll know it’s in right when the handle is flush with the side of the tank. Secure the handle from inside the tank with the new mounting nut.
A person tests their toilet lever replacement.
Attach the chain to one of the holes in the lever. There are usually a few to choose from. You want around one inch of slack in the chain so that it flushes properly. Try a few of the different holes in the lever until you find the right length.Turn the water back on and test it out. It should flush easily, without rattling.

Congratulations! You now know how to install a toilet handle.

By following these steps, you have hopefully fixed or replaced your loose toilet handle.

If your toilet handle broke or keeps coming loose, get in touch with Mike Diamond. We’ll diagnose the problem and make sure your toilet is working properly. No matter what your toilet question, Mike Diamond – your trusted LA plumber – has the answer.

The post How to Fix a Loose Toilet Handle appeared first on Mike Diamond Services.

Did you miss our previous article…
https://tkoplumbingco.com/?p=145

post

Different Services Plumbers Offer

by Posted in Plumbing Services

You may not have ever had to hire a plumber, but if you have a plumber’s license, you probably know that there are some things that they cannot do. For instance, if your toilet overflows and needs a new flush, you can’t just put a new handle on it or attach a trap to stop the overflow. A plumber in Bedford TX, who is available on this Website, will need to know exactly what type of trap to place so that he can properly install it and prevent the flood from happening again.plumber

Fixture Cost: The initial fixture cost may often determine who installs it. If you want someone else to break into that brand new sink with voice activation, a plumber most likely isn’t the best choice.

A close friend may be able to do this, as long as she has some plumbing experience and knows where the hot water supply goes and how to install fixtures. A plumber with experience installing faucets is going to charge more than a plumber who has never installed a sink or faucet. The plumber who has installed the water supply should be able to determine which part of the plumbing is leaking. It could be the trap, the line, or the faucet itself that needs to be replaced. The plumber’s job isn’t done until the pipes are completely replaced, which could take several visits to the plumber.

Lead Pipes and Leak Pipes: If the plumber can’t repair the leaky pipes, then what can he/she do? Usually plumbers will recommend using corrosion-proof pipe covers to prevent leaks from occurring. However, if the plumber finds lead pipes under the floor or around the house, he/she should also check the drainage system so there aren’t lead pipes in the floor drain or trap. Lead pipes and traps can cause serious plumbing problems if they are not properly sealed.

Duct Installation and Plumbing Cables: Some plumbers offer duct installation services when doing plumbing jobs, but many do the installation themselves. The difference is usually in the pricing because duct installation usually comes with labor costs.

Water Heaters and Plumbing Fixtures: Plumbers know all about plumbing fixtures because these fixtures are in most homes. From water heaters to water filters to toilets, there are a lot of plumbing fixtures that a plumber can replace for you. If you have an old toilet, for example, you might call a plumber to come and change out the plumbing fixtures – that’s usually a fairly simple task that a plumber can do.

Sewer and Drain Plumbing:  It can be hard to trust a plumber with something as important as your sewer line or septic tank, and it’s definitely a good idea to hire someone who knows what he’s doing with regards to these issues. Plumbing issues can cause a lot of problems, including leaks, clogs, damage, and more, and having a plumber check out your plumbing can keep you from having to deal with the issue in the future.

In conclusion, these plumbing contractors can do many different plumbing jobs. Whether you call in a busted pipe or a clogged toilet, they will fix it for you. They’re great to have around, especially if you have a lot of smaller home projects around the house. Some DIY’ers might not feel comfortable having a plumber inside their home, so hiring these plumbing contractors might be a good idea. Just make sure that you deal with licensed contractors so you don’t end up with a faulty pipe or a clogged toilet. Hiring licensed plumbing contractors will ensure that you’re getting quality work done in your home.

post

Do You Need a Water Treatment System?

by Posted in Plumbing Tips

dripping-faucet
The quality of your water affects your life. If you’re not paying attention to this, then it’s time for you to take better control of it. High-quality water means that you have a high-quality home. We’re going to make sure that you notice all the signs that your home’s water is subpar in any way. Then, we can help you figure out what water treatment system is right for you.

We specialize in water treatment systems in Orlando, FL. We’re going to help you find the water treatment system that’s right for you. We’re licensed, insured, and we’re experts in everything that we do.

Do You Need a Water Treatment System?

So let’s start from the top—do you need a water treatment system for your home?

We know that it’s not always so obvious. Sometimes, you can look at your water and tell that something has gone wrong. Other times, you need some other pointers. Here are a few:

Your water is cloudy Your water tastes badYour water stains your surfaces, clothes, or it makes your clothing or fabrics stuffYour water has an oily filmYour water has a sandy textureYour water has an odorYou’re noticing your stomach hurting after you drink your tap water

Don’t ignore any of these signs. Instead, get in contact with our professionals for the work you need.

The Systems We Work With

If you’ve realized that you need a water treatment system, then you can come to us for services on the following systems:

Water Testing

You need to start at the beginning when it comes to your water treatment services. Starting at the beginning starts with water testing. This is when our professionals will come out and run tests on the water in your home to determine what’s going on with your contaminants.

Although we all live in the same general area here in Orlando, that doesn’t mean that all our contaminants are the same. What’s going on with your home could be completely different than what’s going on with your neighbor. We’ll help you figure out the key issues that need to be addressed.

Reverse Osmosis Systems

If your water is full of unwanted mineral content, then a reverse osmosis system is something that you might need to solve this issue. Reverse osmosis systems are great because they contain a special membrane to remove the contaminants and separate all the salt and minerals within them.

Sometimes, water softener systems aren’t suitable for everyone because they replace mineral content with sodium. If this isn’t suitable for you, the technology of a reverse osmosis system can help you work around this.

Water Softener Systems

Hard water is so common in Orlando, FL. Hard water is caused by high mineral content in your local water supply. The most common minerals that you might notice are calcium and magnesium. Although these aren’t harmful to your personal health, that doesn’t mean that it’s not affecting your home’s plumbing system. The best way to solve this is through the assistance of your water softener system.

Contact Modern Plumbing Industries, Inc. today to schedule an appointment with our team.

Did you miss our previous article…
https://tkoplumbingco.com/?p=130